Blog

Sealing know-how.

Step-by-step guides on silicone, caulk and adhesives — for pros and DIYers.

Stocking sealants: a guide for hardware stores and distributors

A guide for stores working with a sealant wholesale distributor: which sealants to stock, how to merchandise them, and how to handle storage and rotation.

Read article

Sealants for countertop installs: what fabricators should know

Choosing a sealant for countertops: where acetoxy silicone fits, why it's not recommended on porous natural stone, and how to prep and finish joints.

Read article

Should you caulk around a toilet base? How to do it right

Should you caulk a toilet base? Usually yes, with a gap at the back so leaks show. Learn which sealant to use and how to caulk around a toilet right.

Read article

How to use a caulking gun like a pro

How to use a caulking gun: load the cartridge, cut the nozzle right, keep steady pressure, stop drips and lay a clean, even bead on the first pass.

Read article

Caulk shelf life: how to store cartridges

Caulk shelf life explained: how long unopened cartridges last, how to store them, how to save a half-used tube, and how to tell when it has gone bad.

Read article

Sealing around outlets, switches and electrical boxes

How to seal around electrical outlets and switches safely: power off at the breaker, seal only the wall gap outside the box, add gaskets, follow code.

Read article

Choosing a sealant for glass and aluminum

How to choose a sealant for glass and aluminum: the properties that matter, where 100% silicone fits, what to avoid, and how to prep the surfaces.

Read article

How to caulk baseboards and trim before painting

How to caulk baseboards and trim before painting: pick a paintable caulk, cut a small nozzle, run thin beads, tool them clean and paint once cured.

Read article

How to use a high-tack adhesive for mounting

How to use a high tack adhesive for mounting trim, panels and fixtures: surface prep, bead patterns, pressing technique, and when you still need fasteners.

Read article

Caulking in hot weather and direct sun

Caulking in hot weather: why surface temperature matters more than air temperature, how heat shortens skin time, and how to time the job right.

Read article

How to caulk windows inside and out

How to caulk windows inside and out: which joints to seal, which to leave open, and how to match silicone or paintable caulk to the frame, siding and trim.

Read article

How to read a sealant technical data sheet (TDS)

A section-by-section guide to the sealant technical data sheet: skin time, cure rate, hardness, movement, temperatures and the limitations not to skip.

Read article

ASTM C920 explained: what Type S, Grade NS and Class 25 mean

What ASTM C920 Class 25, Type S and Grade NS mean on a sealant label, how to read the code, and why it matters when you seal a joint that moves.

Read article

How to seal gaps around exterior doors

Seal gaps around doors the right way: caulk the fixed joints, weatherstrip the moving ones, and pick the sealant that suits the siding, trim and threshold.

Read article

Can you paint over silicone caulk?

Can you paint silicone caulk? No: paint beads up and peels off 100% silicone. Here is why, and what to use instead when a joint needs to match the wall.

Read article

Clear, white or translucent white silicone: how to choose

Clear vs white silicone, plus translucent white: how each color looks on tile, glass and metal, where each works, and how to pick the right shade.

Read article

How to caulk a kitchen backsplash

How to caulk a backsplash where it meets the countertop: why that joint needs caulk, not grout, which sealant to pick, and how to get a clean seam.

Read article

How to seal a glass shower door

How to seal a shower door frame or fixed glass panel: where to caulk, where never to caulk, and how to run a clean silicone bead on glass, metal and tile.

Read article

How to keep mold off shower caulk

Stop mold on shower caulk: why black spots form, how to clean surface mildew, when to replace the caulk, and simple daily habits that keep the seal clean.

Read article

Why caulk fails (and how to prevent it)

Why caulk fails: the common causes of peeling, cracking and mold, from dirty surfaces to wrong joint size, plus simple fixes so your next bead lasts.

Read article

Joint width, depth and backer rod: getting the size right

Caulk joint size and backer rod explained: how wide and deep a sealant joint should be, when to use backer rod, and how to avoid three-sided adhesion.

Read article

How to get a smooth, professional caulk line

Get a smooth caulk line every time: tape the edges, cut the nozzle right, keep steady pressure and tool the bead once before the surface skins.

Read article

How long does silicone take to cure?

How long silicone takes to cure depends on bead depth, humidity and temperature. Learn skin time, cure rate and when a sealed joint can get wet.

Read article

Acetoxy vs. neutral-cure silicone

Acetoxy vs neutral cure silicone: how the two chemistries differ, which surfaces each suits, and how to choose one for glass, metal, tile and stone.

Read article

What "100% RTV silicone" actually means

What does 100% RTV silicone mean? A plain-English guide to RTV, moisture cure, acetoxy chemistry and the label specs that matter on a cartridge.

Read article

Caulking in cold weather: what you need to know

Caulking in cold weather? Learn the minimum application temperature, how cold slows curing, and simple tricks to get a good seal when it is chilly outside.

Read article

How to seal around a kitchen sink

How to seal a kitchen sink rim: remove old caulk, clean and dry the joint, apply a thin silicone bead and tool it smooth for a watertight, clean seam.

Read article

How to caulk a bathtub

How to caulk a bathtub step by step: remove old caulk, tape the joint, run a steady silicone bead, tool it smooth and let it cure before the first shower.

Read article

Silicone vs. acrylic caulk: which one to use

Silicone vs acrylic caulk explained: where each one works, which is paintable, which handles water, and how to pick the right sealant for every joint.

Read article

How to remove old silicone caulk

Learn how to remove old silicone caulk cleanly: cut, peel, scrape and clean off the residue so your new bead bonds properly and lasts for years to come.

Read article

Stocking Senta? Let’s talk.

Wholesale pricing, case packs and distribution across the US. Tell us what you need and we’ll get back within one business day.