# Silicone vs. acrylic caulk: which one to use

URL: https://sentaproducts.com/blog/silicone-vs-acrylic-caulk/
Español: https://sentaproducts.com/es/blog/silicona-vs-sellador-acrilico/
Português: https://sentaproducts.com/pt/blog/silicone-ou-selante-acrilico/

Published: 2026-01-17 · Updated: 2026-11-19

Silicone vs acrylic caulk explained: where each one works, which is paintable, which handles water, and how to pick the right sealant for every joint.

Use silicone caulk for wet areas and non-porous surfaces like glass, metal, glazed tile and tubs, where you need lasting flexibility and water resistance. Use siliconized acrylic latex caulk for porous surfaces like wood, drywall, plaster, brick and concrete, especially when you plan to paint over it.

That is the short answer. Below is a closer look at how the two compare so you can pick the right tube for each job.

## The basic difference

**100% silicone** cures by reacting with moisture in the air into a rubbery, elastic seal. It does not shrink much, stays flexible across a very wide temperature range and sheds water. The trade-off: it cannot be painted, and cleanup of uncured silicone takes a solvent, not water.

**Siliconized acrylic latex caulk** is a water-based acrylic sealant with silicone added for better adhesion and elasticity. It cleans up with water, has little or no odor and can be painted once cured. It suits indoor trim and wall gaps and low- to medium-movement joints, but it is not meant for joints that sit in water all the time.

## Silicone vs acrylic caulk at a glance

| | 100% RTV silicone | Siliconized acrylic latex |
|---|---|---|
| Typical surfaces | Glass, aluminum, metals, glazed tile, tubs | Wood, drywall, plaster, brick, concrete |
| Paintable | No | Yes, after curing |
| Constant water exposure | Yes | No |
| Cleanup | Solvent before cure | Water |
| Odor | Vinegar smell while curing (acetoxy) | No odor |
| Movement | Higher (Senta: ±25 %, ASTM C920 Class 25) | Low to medium |

## When to choose silicone

Pick a 100% silicone for:

- Bathtubs, showers and shower doors
- Kitchen and bathroom sinks on non-porous surfaces
- Glass, aluminum frames and metal flashing
- Exterior joints exposed to sun, rain and temperature swings

Senta 100% RTV Silicone is mold and mildew resistant, UV and weathering resistant, and rated for ±25 % joint movement under ASTM C920 Class 25. It stays flexible from -62 °F to 400 °F in service.

Know its limits, too. Senta silicone is an acetoxy cure, so it is not for porous natural stone (marble, granite), concrete or other porous surfaces, and should not be used on mirrors or on copper, brass, lead or other sensitive metals. It is also not paintable. If a joint will be painted, silicone is the wrong choice.

## When to choose siliconized acrylic latex

Pick siliconized acrylic latex for:

- Baseboards, crown molding, door and window casing before painting
- Cracks in walls and ceilings
- Gaps around windows, walls and doors on porous materials like brick, concrete, wood and plaster

Senta Siliconized Acrylic Latex Caulk is paintable after curing, solvent-free and cleans up with water. It becomes weatherproof and waterproof after curing, but it is not designed for joints permanently exposed to water, such as the seam where a tub meets tile. Apply it between 40 °F and 105 °F, keep the joint dry for at least 2 hours, and don't apply it if rain or frost is expected.

On very porous surfaces, you can prime the joint first by thinning the caulk with water: 1 part caulk to 4 to 5 parts water.

## Situations where people get it wrong

- **Silicone on trim you plan to paint.** Paint will not stick to silicone. Use siliconized acrylic on trim.
- **Acrylic caulk around a tub or shower.** The joint stays wet too often. Use silicone.
- **Silicone on concrete or natural stone.** Acetoxy silicone is not recommended on porous surfaces. Use acrylic for concrete gaps and follow the stone supplier's advice for natural stone.
- **Mixing them in the same joint.** Pick one product per joint. Neither sticks reliably on top of the other once cured.

## A simple rule of thumb

Ask two questions about the joint:

1. **Will it be painted?** If yes, use siliconized acrylic latex.
2. **Will it get wet often, or is it glass, metal or glazed tile?** If yes, use 100% silicone.

If neither applies, such as a dry gap on a porous wall, siliconized acrylic is usually the easier product to work with. When in doubt, check the technical data sheet for both products on our [technical documents page](/technical/). To compare both side by side, browse the [Senta product range](/products/).

## FAQ

### Is silicone or acrylic caulk better for a bathroom?
For tubs, showers and sinks, silicone is the usual choice because it stays flexible and handles constant water. Siliconized acrylic works for dry bathroom trim and wall gaps that will be painted.

### Can you paint silicone caulk?
No. Paint does not bond to silicone. If a joint needs to be painted, use a paintable siliconized acrylic latex caulk instead.

### Can I use acrylic caulk outside?
Senta Siliconized Acrylic Latex Caulk is weatherproof after curing and works for exterior gaps on porous materials, as long as the joint is not permanently exposed to water and no rain or frost is expected while it cures.
